Hz/V Monitoring Settings - Deif GC-1F Installation Instructions Manual

GC-1F
6220 Hz/V OK
No. Setting
6221 Hz/V OK*
6222 Hz/V OK*
6223 Hz/V OK*
The setting ranges refer to nominal setting (nominal voltage +/- setting %, nominal
frequency +/- setting Hz).
6230 GB close delay
No. Setting
6231 GB close delay
6233 GB pulse ON time
No. Setting
6234 GB pulse ON time
6290 Idle mode
No. Setting
6291 Idle mode
6292 Idle mode
6293 Idle mode
Idle mode can be controlled via a binary input. If this is selected, the idle mode remains as long
as the input is ON. If a binary input is not used, the idle mode can be selected to be active for
manual or auto or both running modes.
- Both manual and auto: Select Man./Auto
- Manual only:
- Auto only:
6320 Engine heater on
No. Setting
6321 External heater on
6330 Engine heater off
No. Setting
6331 External heater off
In order to make the external heater function work, a relay must be designated
to this function in the output settings.
DEIF A/S

Hz/V monitoring settings

Timer
Voltage
Frequency
Timer
Timer
Enable
Timer
Active
Select Man.
Select Auto
Set point
Set point
Installation Instructions and Reference Handbook
Min. setting Max. setting
1.0 s 99.0 s
1 % 70 %
1 Hz 20 Hz
Min. setting Max. setting
0.0 s 30.0 s
Min. setting Max. setting
0.1 s 10.0 s
Min. setting Max. setting
OFF ON
1.0 s 300.0 s
Man. Man./aut.
Min. setting Max. setting
0 C/F 100 C/F
Min. setting Max. setting
0 C/F 100 C/F
Factory
setting
5.0 s
10 %
5 Hz
Factory
setting
0.5 s
Factory
setting
0.5 s
Factory
setting
OFF
5.0 s
Aut.
Factory
setting
10 C/F
Factory
setting
20 C/F
Page 111 of 123