Options - Deif GC-1F Installation Instructions Manual

GC-1F
Generator monitoring

3-phase or single phase generator monitoring
Voltage/current/frequency/power factor/power/reactive power
o
Mains monitoring

3-phase or single phase generator monitoring
Voltage/frequency
o
Generator protection (ANSI)

Over-/under-voltage (27/59)

Over-/under-frequency (81)

Over-current (50/51)

Overload (32)

Reverse power (32)

Phase sequence error (47)
Mains protection (ANSI)*

Over-/under-voltage (27/59)

Over-/under-frequency (81)
*Only HW 1.05 and SW 2.2x.x
M-Logic

Simple logic configuration tool

Selectable input events

Selectable output commands
Display panel

128 × 64 pixel backlight STN

Alarm texts editable

All texts in multi-language

Clear text alarm messages

Clear text diagnostics for both hardwired inputs and CAN bus messages (J1939)

Log book holding 150 log entries

Real time clock for time and date
The basic GC-1F genset controller unit can be equipped with an AMF and option needed to
provide a real emergency power system controller. Furthermore, CAN bus communication for
different engine types is available, and CAN bus for up to two AOPs is possible at the same
time. Also Modbus RS-485 is available as an option.
A full options list is included in the data sheet.
DEIF A/S
Installation Instructions and Reference Handbook

Options

Page 10 of 123