Communication Setup - Deif GC-1F Installation Instructions Manual

GC-1F
7940 CAN2 comm. error
No. Setting
7941 CAN2 comm. error
7942 CAN2 comm. error
7943 CAN2 comm. error
7944 CAN2 comm. error
7980 CAN 2
No. Setting
7983 CAN 2
7984 CAN 2
Menu 7984 is for re-establishing communication after a fault/disconnection.
After changing type, the parameter list in the PC USW must be uploaded again.
7950 KL320x config.
No. Setting
7951 KL320x config.
7952 KL320x config.
7953 KL320x config.
7954 KL320x config.
The above selections for KL 3202/3204 cannot be changed.
After changing module type, the parameter list in the PC USW must be
uploaded again.
9110 Password
No. Setting
9116 Password
9117 Password
User password
If you forget the password, contact DEIF Support for details.
9210 Setup norms
No. Setting
9211 Setup norms
DEIF A/S

Communication setup

Delay
Relay output A
Relay output B
Enable
ID
Reset
Module 1
Module 2
Module 3
Module 4
Customer
Service
Service
Installation Instructions and Reference Handbook
Min. setting Max. setting
2.0 s 600.0 s
Not used Option-
dependent
Not used
OFF ON
Min. setting Max. setting
10 64
NO YES
Type
Pt100 (2/3-wire)
Pt1000 (2/3-wire)
10-3200 Ω (2-wire)
10-1200 Ω (2-wire)
Min. setting Max. setting
0 9999
0 9999
Min. setting Max. setting
None selected VDE notstrom
Factory
setting
10.0 s
R0 (none)
R0 (none)
OFF
Factory
setting
1
NO
Factory setting
Pt100 (2/3-wire)
Factory
setting
2000
2001
Factory
setting
None selected
Page 118 of 123