Push-Buttons, Leds And Display; Unit; Dimensions; Push-Button Functions - Deif GC-1F Operator's Manual
Hide thumbs
Also See for GC-1F:
- Installation instructions manual (123 pages) ,
- Operator's manual (11 pages)
Table of Contents
Advertisement
GC-1F operators manual 4189340748 UK
3. Push-buttons, LEDs and display
3.1 Unit
3.1.1 Dimensions
Front dimensions H x W
Unit depth
3.1.2 Push-button functions
The push-buttons on the unit have the following functions:
1500V
PROT
HYSTERESIS
LIMT
13
12
11
1:
Normal display: Scrolls the display down once. Programming: Decreases setpoint value.
2:
Normal display: Scrolls the display up once. Programming: Increases setpoint value.
3:
Resets horn relay. Extra function: Press and hold button 2 seconds to see alarm list.
4:
Enters value/acknowledges alarm.
5:
Jumps from parameter settings to display. Removes pop-up messages.
6:
Initiates the test sequence selected for the push-button.
7:
Lamp test. One push will illuminate all LEDs for 3 seconds.
8:
Manual running mode selector.
9:
AUTO running mode selector.
10: Breaker opens.
11: Breaker closes.
12: Stops the engine instantaneously. If the unit is in AUTO mode, the mode will change to MAN and the
engine will stop.
13: Start engine (local (not auto)) running mode.
DEIF A/S
1
1500V
1500V
VOLT
GEN
U1
20%
DEL.
HIST
ACT
10
160 x 220 mm (6.30" x 8.66")
54 mm (2.13")
2
3
9
8
7
Push-buttons, LEDs and display
4
5
6
Page 6 of 9
Advertisement
Table of Contents
