CGC 200 Operator's manual 4189340770
UK
2. Front panel, push-buttons, LEDs and display
2.1 Front panel
2.1.1 Front panel drawing
The drawing below shows the CGC 200 front panel.
2.2 Push-buttons
2.2.1 Push-button functions
The push-buttons on the front panel have the following functions:
Button
Description
Stop
Start
Auto mode
Page down
The push-buttons on the front panel can also be used to change the controller parameters. This is described
later in this manual.
DEIF A/S
●
Stops the engine and changes the mode to Stop if the genset is running.
●
Resets the alarms if there is a shutdown alarm.
●
Tests all the LEDs and the full LCD display if pressed for more than three
seconds in Stop mode.
●
Changes the mode to Manual, if in Auto mode.
●
Starts the engine (Manual mode only).
●
Changes the mode to Manual, if in Auto mode.
Changes from Manual to Auto mode.
Pages down, to show other operating values.
Front panel, push-buttons, LEDs and
Function
display
Page 7 of 43