Messages Displayed When You Use The Printer Function; Messages Displayed On The Control Panel When You Use The Printer Function - Ricoh MP C401 SERIES User Manual

10. Troubleshooting
Messages Displayed When You Use the Printer
Function
This section describes the principal messages that appear on the display panel, error logs or reports. If
other messages appear, follow their instructions.

Messages Displayed on the Control Panel When You Use the Printer Function

• Before turning off the power, see page 53 "Turning On/Off the Power".
Message
"Hardware Problem:
Ethernet"
"Hardware Problem: HDD"
"Hardware Problem: USB"
"Hardware Problem:
Wireless Card"
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
card".)
178
Causes
An error has occurred in the
Ethernet interface.
An error has occurred in the
hard disk.
An error has occurred in the
USB interface.
The wireless LAN board can be
accessed, but an error was
detected.
Solutions
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then confirm
the wireless LAN board is inserted
correctly. And then, turn on the
power again. If the message
appears again, contact your service
representative.