Editing Part Programs - Siemens SINUMERIK 808D Milling Programming And Operating Manual

4.2

Editing part programs

Overview
A part program or sections of a part program can only be edited if currently not being
executed.
Operating sequence
Block editing options
Milling Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
1. Select the desired operating area.
2. Enter the program directory.
3. Use this softkey or the cursor keys to select the program file to be edited.
4. Press this key to open the program file. The system switches over to the
program editor window.
5. Edit the blocks in the window as required (see table below for the
descriptions of editing options). Any program changes are automatically
stored.
Replaces the block number from the current cursor to the program end
Searches for strings
Selects the text segment before the cursor
Copies the text segments
Pastes the text segments
Delete a text segment
Part programming
4.2 Editing part programs
55