Setting-Up - Siemens SINUMERIK 808D Milling Programming And Operating Manual

Setting-up

Overview
When working with the CNC, you need to set up the machine and the tools, etc. as follows:
● Create the tools and cutting edges.
● Enter/modify the tool and work offsets.
● Enter the setting data.
Softkey functions
Pressing this key on the PPU allows you to open the following window:
①
Displays and modifies the tool offsets
② Displays and modifies the tool wear data
③
Displays and modifies the work offsets
④
Displays and modifies the R variables
⑤
Configures and displays lists of setting data
⑥
Displays the defined user data
Milling Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
⑦
Measures the tool manually or automatically
⑧ Creates a new tool
For more info, see Section "Creating a new tool
(Page 28)".
⑨
Opens a lower-level menu for cutting edge settings
For more info, see Section "Creating a new cutting
edge (Page 29)".
⑩
Removes the currently selected tool from the tool list
⑪
Searches for your desired tool with the tool number
3
27