Siemens SINUMERIK 808D Milling Programming And Operating Manual page 59

Renaming programs
Viewing and executing recent programs
Milling Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
1. Select the desired operating area.
2. Choose the desired storage location and position the cursor on the file or
directory which you would like to rename.
3. Press the extension softkey to access more options.
4. Press this vertical softkey to open the window for renaming.
5. Enter a desired new name with the extension in the input field.
6. Press this softkey to confirm your entry, or press the following softkey to
cancel:
1. Select the desired operating area.
2. Press this softkey to open the list of recent files. Note that even the
deleted files are also displayed in the list.
3. Position the cursor on a file and press this vertical softkey to start
executing the program.
Alternatively, you can press the following key to open the program file for
editing:
To clear the current file list, press the following softkey:
Part programming
4.3 Managing part programs
59