Key combinations
Key combination
<ALT> + <X>
<ALT> + <V>
<ALT> + <C>
<ALT> + <B>
<ALT> + <M>
<ALT> + <N>
+
<ALT> + <H>
<ALT> + <L>
<ALT> + <S>
<=>
<CTRL> + <B>
<CTRL> + <C>
<CTRL> + <D>
<CTRL> + <P>
<CTRL> + <R>
<CTRL> + <S>
Milling
Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
Description
Opens the machining operating area:
Opens the program editing operating area:
Opens the offset parameters operating area:
Opens the program management operating area:
Opens the diagnostics operating area
Opens the system data management operating area:
Calls the online help system
Enables input of lowercase letters
Applicable only when the user interface language is Chinese
Calls the input method editor for entering Chinese characters
Calls the pocket calculator.
Note that this function is not applicable in MDA mode.
Selects text in program blocks
Copies the selected text
Shows pre-defined slides on the screen
Captures screens
Restarts the HMI
Saves start-up archives
1.1 SINUMERIK 808D operator panels
Introduction
9