Siemens SINUMERIK 808D Milling Programming And Operating Manual page 51

Parameters for face milling
①
②
③
④
⑤
⑥
⑦
Milling Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
6. Select the cutting path of the tool during machining.
7. Use this softkey to confirm your settings. The system now automatically
creates the part program.
8. Press this key on the MCP to run the part program.
Tool number
Cutting edge number
Work offset to be activated
Retraction plane
Safety distance
Path feedrate
Spindle speed
3.5 Other settings in "JOG" mode
⑧ Direction of spindle rotation
⑨ Machining type selection: roughing or
finishing
⑩
X\Y\Z position of the blank
⑪
Cutting dimension in the X\Y\Z direction,
specified in increments
⑫
Cutting length in the X\Y\Z direction,
specified in increments relative to the
workpiece edge
⑬
Stock allowance in the Z direction
Setting-up
51