Siemens SINUMERIK 808D Milling Programming And Operating Manual page 8

Introduction
1.1 SINUMERIK 808D operator panels
Further information
Control keys
Cursor keys
Operating area keys
Status LEDs
USB interface
8
Deletes a character selected to the left of the cursor
Deletes the selected file or character
Indents the cursor by several characters

Toggles between the input field and the selected program name

Confirms your entry of a value

Opens a directory or program

Reserved for future use
Moves the cursor to the end of a line
Scrolls upwards on a menu screen
Scrolls downwards on a menu screen
Toggles between entries in the input field

Enters the "Set-up menu" dialog at NC start-up

To open the system data management operating area, press the following
key combination:
+
Enables user's extension application, for example, to generate user dialogs
with the EasyXLanguage function.
For more information about this function, refer to the SINUMERIK 808D
Function Manual.
LED "POK"
Lights up green: The power supply for the CNC is switched on.
LED "RDY"
Lights up green: The CNC is ready for operation.
LED "TEMP"
Unlit: The CNC temperature is within the specified range.
Lights up orange: The CNC temperature is out of range.
Connects to a USB device, for example:
An external USB memory sticker, to transfer data between the USB

sticker and the CNC
An external USB keyboard which functions as an external NC keyboard

Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
Milling Part 1: Operation