Table of Contents
Advertisement
Table 3–2 (Cont.): Operator Call Messages
Number
Message
18 EC INCORRECT
19 PAPER PATH 3
Description and Action
This message is displayed whenever the envelope cassette is
installed in the lower cassette slot. Do not confuse the envelope
cassette with the optional envelope feeder.
To clear the display, remove the envelope cassette and install it in
the upper cassette slot.
Troubleshooting
A fault exists if this message is displayed
and the envelope cassette is not installed in the lower slot. Do the
following to fix the problem:
1.
Inspect the actuation levers of the lower cassette size-sensing
switches.
Fix or replace any damaged or nonfunctioning
components.
2.
Replace the dc control board.
This text is displayed when the host system specifies feeding from
the envelope cassette while the printout selector is set for facedown
(upper) stacking. All envelope printing requires simplex print
mode and faceup (rear) stacking.
To clear this error, turn the printout selector to the faceup stacking
position.
Troubleshooting
A malfunctioning printout selector switch
circuit causes this type of error.
section of 19 PAPER PATH 4 in this table for testing and fixing
information.
DEClaser 2200 Troubleshooting
Refer to the troubleshooting
3–11
Advertisement
Table of Contents
