Table of Contents
Advertisement
3.4 Troubleshooting Paper Jam and Feed Faults
This section is the fault isolation procedure (FIP) for correcting paper jam
problems in the DEClaser 2200 printer.
Refer to Section 1.3.2 for information about the rollers, sensors, and the
shape of the paper path.
3.4.1 Jam Troubleshooting Start FIP
FIP NOTES: This section of the FIP is used to repair a printer that jams
or displays jam symptoms. Start your troubleshooting at Figure 3–3, which
will direct you to one of the following specific subsections:
•
Section 3.4.1 for jam indications that occur at power-up or occur
spontaneously. These indications are sometimes called phantom jams
because there is no sheet of paper in the paper path.
•
Sections 3.4.2–3.4.6 for jams that occur in areas 1–4 that are inside the
printer. Figure 3–4 shows the location and boundaries of the four areas.
DEClaser 2200 Troubleshooting
3–25
Advertisement
Table of Contents
