Dc Control Board Signals - Minolta DEClaser 2200 Service Manual

1.4.3 DC Control Board Signals

The dc control board operates and distributes power to all the electronic and
electromechanical components in the duplex unit and print engine. With
the exception of the scanner assembly, all connections to the dc control
board are made by the following three connectors:
• J214 is a 40-pin connector that carries all print engine connections.
• J215 is a 40-pin connector that carries all duplex and inverter unit
connections.
• J216 is a 9-pin, high current type connector that connects dc power to
the dc control board.
Figure 1–12 and Figure 1–13 show the input signals to the dc control board
from the print engine, duplex unit, and video control board.
DEClaser 2200 Physical and Functional Description 1–19