Minolta DEClaser 2200 Service Manual page 56

Table 2–4 (Cont.): 2200 Setup, Feature, and Value Menus
Setup Feature
Level Level
xon/xoff
INTERFACE etx/ack
SAVE–>RAM ok
SAVE–>NVRAM ok
LOAD<–ROM ok
1
This value appears only if you select RS232C.
The LOAD<– ROM factory values are in bold.
The equal (=) sign indicates the selected value. When you scroll into a value level, the selected
value is displayed first.
2–14 DEClaser 2200 Printer Service Guide
Value
Level Comment
1
=ON If you select ON, XON/XOFF flow control
OFF is enabled.
1
=ON If you select ON, ETX/ACK flow control is
OFF enabled.
– Writes the selected value of COPY/
OVERLAY and autoNL into RAM.
– Writes all the selected values into NVRAM.
The contents of NVRAM are retained
through a power-down cycle.
– Loads all factory values from ROM to
selected values.