Table of Contents
Advertisement
Figure 3–1: Start FIP
Turn on the printer power. Do you hear
the motors turn or see any activity on
the control panel indicators or display?
Go to Section 3.2
or Figure 3-2
Press the Test Print button. Does
the engine test pattern print?
Yes
No
Check the LVPSA
voltages or swap
the LVPSA. Does
the problem still
exist?
Check the display
panel connectors.
Swap the following components
to fix the problem:
Display panel
Video control board
DC control Board
3–2 DEClaser 2200 Printer Service Guide
Start
No
Yes
Is the control panel blank, hung,
or not functioning correctly?
Hung
Is 00 READY displayed or is
the Alarm indicator on with an
error message displayed?
00 READY
Print and examine
Test Print B.
Is 00 READY displayed or is
the Alarm indicator on with an
error message displayed?
No
Did any paper
jams occur?
No
Are there any image
defects?
No
Yes
Go to TCC Appendix
Functioning
Alarm
Yes
Go to Section 3.3
Yes
Go to Section 3.4
Go to Section 3.5
MLO-004920
Advertisement
Table of Contents
