Minolta DEClaser 2200 Service Manual page 69

3.2 Troubleshooting Power-Up Faults
You see and hear the following when you power up the DEClaser 2200
printer, assuming that both cassettes and an EP-S cartridge are installed
and no error condition is detected.
1. All control panel indicators come on.
2. Solid blocks are momentarily displayed.
If optional memory is installed, an active display pattern occurs.
3. The scanner, main, and duplex motors start up with a whirring sound.
If any paper is left in the fixing unit, it moves into the fixing unit
exit, inverter, or second pass sensor to produce a 13 PAPER JAM error
message, and the fixing heater does not start.
4. The text 02 WARMING UP is displayed and the Ready indicator flashes.
It takes less than two minutes to achieve the 160°C (320°F) fixing unit
standby temperature.
5. The text 00 READY is displayed and the Ready indicator comes on
steadily.
DEClaser 2200 Troubleshooting 3–3