Table of Contents
Advertisement
Table 2–4 (Cont.): 2200 Setup, Feature, and Value Menus
Setup
Feature
Level
Level
INITIAL (Cont.)
paint
The LOAD<– ROM factory values are in bold.
The equal (=) sign indicates the selected value. When you scroll into a value level, the selected
value is displayed first.
Value
Level
Comment
Partial
The amount of available memory deter-
=Full
mines which values are displayed.
Dual
•
If the minimum amount of memory
is installed (1024 KB), you can only
select the Partial value; Full and
Dual are not displayed.
•
If the 1-MB optional memory is
installed, you can select Partial or
Full; Dual is not displayed.
•
If either the 2-MB or 3-MB optional
memory or more is installed, you can
select Partial, Full, or Dual.
The paint selection allocates the size of
the font cache and page areas of available
memory.
(bitmapped) fonts are cached, more of the
available memory is utilized; this leaves
less room for bitmapped print data and
slows down the printer.
required to bitmap a smaller area, which
eventually causes the 21 COMPLEX
DATA message to be displayed.
Table 3–3 for additional information.
•
When you select Partial, a portion of
a page is bitmapped, then printed.
•
When you select Full, one full page is
bitmapped, then printed.
•
When you select Dual, two complete
single-page bitmaps are reserved in
memory. This enables the printer to
simultaneously print page one and
bitmap page two.
DEClaser 2200 Control Panel Operation
As more and more processed
More time is
2–11
See
Advertisement
Table of Contents
