Minolta DEClaser 2200 Service Manual page 52

Table 2–4 (Cont.): 2200 Setup, Feature, and Value Menus
Setup Feature
Level Level
LAYOUT (Cont.) autoNL
COPY/OVERLAY copy
COMMAND message
INITIAL macro
The LOAD<– ROM factory values are in bold.
The equal (=) sign indicates the selected value. When you scroll into a value level, the selected
value is displayed first.
2–10 DEClaser 2200 Printer Service Guide
Value
Level Comment
ON Determines if the line of text is truncated
=OFF or wrapped at the right-hand margin.
When set to ON, the printer automatically
inserts a carriage return and line feed
character to wrap the text on the next line.
When set to OFF, the printer truncates the
line at the right-hand margin.
nn Determines the number of copies of a page
=00 that the printer prints. For example, if set
to =05, five copies of each page are printed
before the printer accepts the next page
from the host system. The number counts
from 01–99 in increments of 1.0.
English
The language text appears on the display
=Finnish when the printer is in the online ready
French mode. The setup menus always are dis-
German played in English.
Italian
Japan
Norway
Port.
Spanish
Swedish
Danish
Dutch
yyy Counts up or down from 000–099 in
000 increments of 1.0.
The macro feature is used to set the
printer environment to match that of the
host system.
combination of the device identification
and character set (Cset) numbers. The
sum of the two numbers is entered as the
macro number. See Appendix A for a list
of identification and Cset numbers.
The macro number is a