Table of Contents
Advertisement
Table 3–2 (Cont.): Operator Call Messages
Number
Message
PF FEED A4
PF FEED LETTER
PF FEED LEGAL
PF FEED EXEC.
PF FEED PAPER nn
3–14 DEClaser 2200 Printer Service Guide
Description and Action
The PF FEED message requests the operator to insert a sheet of
paper into either manual paper feeder.
When the upper or lower manual feed sensor is actuated, the
printer delays momentarily to allow the operator to fully insert
the sheet, and then it feeds and prints the sheet.
The PF FEED PAPER nn message requests the operator to
manually load and feed a nonstandard size paper. The nn number
range is 80–99.
Troubleshooting
Repeat the following procedure on the
upper and lower cassette slots to test, find, and fix a manual feed
fault.
1.
Press
until the FEEDER = MANUAL message is
Feeder Select
displayed.
2.
Press
to print a test pattern. The PF LOAD message
Test/Font
is displayed. The requested size paper to load is determined
by the size of the installed cassette or by the value selected
for the paper feature on the initial setup menu. See Table 2–4
for more information about the setup menu.
3.
Insert a sheet of paper into the manual feeder. A fault exists
if the message does not change and the pickup roller does not
turn.
4.
Do the following to fix a PF FEED fault:
•
Swap the LVPSA, if the upper cassette slot is faulty.
•
Swap the sensor on the lower cassette sensor assembly,
if the lower cassette slot is faulty.
•
Swap the dc control board.
NOTE: If the top sheet of the cassette paper
feeds, instead of the manual feed sheet, you
are not pushing the paper far enough or fast
enough into the manual feeder. If the sheet
feeds, but jams, go to Section 3.4.1 to fix the
paper feeding or jamming problem.
Advertisement
Table of Contents
