Table of Contents
Advertisement
Installation
Electrical Requirements
WARNING
Electrical power must be provided to
tumbler at all times. The fire suppression
system will be inoperative if the main
electrical power supply is disconnected.
No independent external power source or supply
connection is necessary. Power to operate the 24 Volt
fire suppression system is from the rear junction/
contactor box.
Auxiliary Alarm
The fire suppression system provides an auxiliary
output signal when the system is activated. During
tumble dryer installation, you have the option to
connect a separate alarm system to this auxiliary
output. Potential uses of the auxiliary output include,
but are not limited to: (1) sounds an alarm, (2)
activates a building sprinkler system, (3) notifies a fire
department, etc. Use of the auxiliary output is not
required for the fire suppression system to operate, but
may be used for additional protection.
The connection to the auxiliary output is made through
the FS-1 and FS-2 fast-on connections inside the fire
suppression control box. Refer to Figure 6. The relay
is rated for 24 VAC, 5.2 Amp, sealed current.
NOTE: The auxiliary output is activated during
fire suppression system maintenance test sequence.
Consider this fact prior to your system test every
three months. (Example: If the external system
uses the auxiliary output to call the fire
department, inform the fire department before and
after the fire suppression system maintenance test.)
22
W690
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7
6
5
1
Opening for Auxiliary Alarm Cable
2
Fuse
3
Auxiliary Alarm Fast-On Connection
4
Test Button
5
Light
6
Reset Button
7
Auxiliary Alarm Fast-On Connection
Figure 6
1
2
TMB1999N
4
TMB1999N
70457901ENR7
3
Hide quick links:
Advertisement
Table of Contents
