Gear Stages; Spindle - Siemens SINUMERIK 802D Programming And Operating Manual

10.4.4

Gear stages

Functionality
Up to 5 gear stages can be configured for a spindle for speed / torque adaptation.
Programming
The relevant gear stage is selected in the program via M commands:
M40
M41 to M45
10.4.5

2. Spindle

Function
With SINUMERIK 802D sl plus and 802D sl pro, a 2nd spindle is provided.
For these control systems, the kinematic transformation functions for grinding are possible.
These functions require a second spindle for the driven workpiece.
The main spindle is operated as a rotary axis in these functions.
Master spindle
A series of functions is associated with the master spindle that can only be used with this
spindle:
• G95
• G96, G97
• LIMS
• M3, M4, M5, S...
The master spindle is defined via configuration (machine data). Generally it is the main
spindle (spindle 1). A different spindle can be defined as master spindle in the program:
• SETMS(n)
Switching back can also be performed via:
• SETMS
• SETMS (1)
The definition of the master spindle changed in the program is only valid until End of
program/program abort. Thereafter, the configured master spindle is again active.
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
; Automatic gear stage selection
; Gear stages 1 to 5
; Rev. feedrate
; Constant cutting rate
; upper speed limit for G96, G97
; simple specifications for direction of rotation, stop and speed
; spindle n (= 1 or 2) is the master spindle as of now.
; configured master spindle is now master spindle again
; Spindle 1 is now master spindle again.
Programming
10.4 Spindle movements
281