Working On The Basis Of A Network Connection - Siemens SINUMERIK 802D Programming And Operating Manual

Network operation
11.3 Network operation
11.3.4

Working on the basis of a network connection

The remote access (access to the control system from a PC or from a network) to the control
system is disabled by default.
After log-in of a local user, the following functions are offered to the RCS tool:
● Commissioning functions
● Data transfer (transfer of part programs)
● Remote control for the control system
To grant access to a part of the file system, first share the relevant directories with other
users.
Note
If you share directories with other users, the authorized network nodes are granted access to
the shared files in the control system. Depending on the sharting option, the user can modify
or delete files.
346
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding