Siemens SINUMERIK 802D Programming And Operating Manual page 68

Manual mode
5.2 JOG mode - "Position" operating area
Softkeys
Note
An explanation of the vertical softkeys can be found in the section on the MDA mode
(Page 70).
This function is for grinding (precision grinding) with the handwheel. This function does not
require a workpiece program.
This function is used to determine the dresser positions in the machine for dressers that are
used by means of the geometry axes.
This function is used to detect the workpiece position in the machine with respect to the
particular axis.
This function is used to shape a "raw" grinding wheel without generating an NC program.
This function is used to set the measuring position of the probe. The measuring position is
set up for each particular workpiece
Note
The parameters within the "Settings" function do not affect grinding.
Use this softkey to switch between the metric and the inch dimension systems
68
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding