4.10
User data
Functionality
The user data is internally processed in the cycles. This data can be changed as necessary.
Operating sequences
These can be found in the <OFFSET PARAM> operating area.
Press the <User data> softkey. This will open the "User data" start screen for the cycles.
Figure 4-28
Place the cursor bar on the input field to be modified and enter the values.
Either press the <Input> key or move the cursor to confirm the entry.
Use this function to search for the user data.
See also
User data (Page 377)
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
User data
Define
4.10 User data
63