The Help System - Siemens SINUMERIK 802D Programming And Operating Manual

Software interface

2.4 The help system

2.4 The help system
Comprehensive online help is stored in the control system. Some help topics are:
● Product brief of all important operating functions
● Overview and product brief of the NC commands
● Explanation of the drive parameters
● Explanation of the drive alarms
Operating sequence
You can call the help system from any operating area either by pressing the Info key or by
using the key combination <ALT+H>.
Figure 2-4
30
Help system: Table of contents
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding