User Management - Siemens SINUMERIK 802D Programming And Operating Manual

Network operation
11.3 Network operation
11.3.2

User management

Press the "Service display" "Service control system" softkeys in the <SYSTEM> operating
area.
Select the "Service network" "Authorization" softkey to display the user account input screen.
Figure 11-9
The user accounts serve for saving personal settings of the users. To create a new account,
type the user name and the log-in password in the input fields.
A user account is required for communication between HMI and the RCS tool on the
programming device/PC.
For this purpose the user has to enter this password on the HMI during RCS log-in via
network.
This password is required also, if the user want to communicate with the control system from
the RCS tool.
Use the "Create" softkey to insert a new user into the user management.
Use the "Delete" softkey to delete the selected user from the user management.
344
User accounts
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding