Programming; Fundamental Principles Of Nc Programming; Program Names - Siemens SINUMERIK 802D Programming And Operating Manual

Programming

10.1

Fundamental Principles of NC Programming

10.1.1

Program names

Each program has its own program name. The name can be freely chosen during program
creation, taking the following conventions into account:
● The first two characters must be letters;
● Use only letters, digits or underscore.
● Do not use delimiters (see Section "Character set").
● The decimal point must only be used for separation of the file extension.
● Do not use more than 27 characters.
Example
WORKPIECE527
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
10
219