Siemens SINUMERIK 802D Programming And Operating Manual page 379

Name
_GC_FWEG
_GC_SEARCHS
_GC_SEARCH
_GC_SEARCHSET
_GC_SEACRHVALUE[
0..2]
_GC_SUGFEED
_GC_MF[18]
_GC_MF[19]
NOTICE
The values stored as the default must be checked by the machine manufacturer and
adapted to the realities of the machine.
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Type Default
Value
REAL
Description
Free wheel travel path (measurement control)
Tag for seat regrinding is evaluated by the cycles so that the
individual seat can be identified via a block search.
Tag for seat regrinding is evaluated by the cycles so that the
individual seat can be identified via a block search.
Tag for seat regrinding is evaluated by the cycles so that the axes
can be recalibrated.
Regrinding calibration values
Independent of basic system
0 = GWPS in m/s
1 = GWPS in feed/min
Enable program level abort of CYCLE448
Blocking and resetting of last program level abort
Appendix
A.1 User data
379