Siemens SINUMERIK 802D Programming And Operating Manual page 378

Appendix
A.1 User data
Name
_GC_MF[0]
_GC_MF[1]
_GC_MF[2]
_GC_MF[3]
_GC_MF[4]
_GC_MF[5]
_GC_MF[6]
_GC_MF[7]
_GC_MF[8]
_GC_MF[9]
_GC_MF[10]
_GC_MF[11]
_GC_MF[12] .
_GC_MF[13]
_GC_MF[14]
_GC_MF[15]
_GC_MF[16]
_GC_MF[17]
_GC_IN_KS
_GC_IN_MZ0
_GC_IN_MZ1
_GC_IN_MZ2
_GC_IN_MZ3
_GC_IN_MZ4
_GC_IN_ABR
_GC_IN_HAND
_GC_IN_BREAK
_GC_IN_HUB
_GC_IN_FEEDSTOP
_GC_WEARTYP
_GC_SSTAT
_GC_FEIN[2]
_GC_FEIN[0]
_GC_FEIN[1]
_GC_SFEIN[10,2]
_GC_RLZTYP
_GC_RLXTYP
_GC_RLX
_GC_RLZ
_GC_BT
378
Type Default
Value
INT 3
21
22
33
34
41
42
65
66
80
81
4
7
9
INT 16
INT 9
INT 10
INT 11
INT 12
INT 13
INT 14
INT 15
INT 13
INT 12
INT 11
INT 0
INT
REAL
REAL
REAL
INT 0
INT 0
REAL
REAL
REAL
Description
Grinding spindle direction of rotation (M3)
Swing in measurement control (M21)
Swing out measurement control (M22)
Structure-borne noise ON (M33)
Structure-borne noise OFF (M34)
Advance dresser (M41)
Retract dresser (M42)
Swing out caliper (M65)
Swing in caliper (M66)
Enable handwheel (M80)
Disable handwheel (M81)
Workpiece spindle direction of rotation (M4)
Coolant ON (M7)
Coolant OFF (M9)
Swing in measurement control, program control (M23)
Swing out measurement control, program control (M24)
Disable stroke reversal if no longitudinal stroke (M27)
Enable stroke reversal if longitudinal stroke (M28)
Number of inputs IN:
Acoustic emission sensor
Retract measurement control
Time measurement control
Switch-over fine finishing measurement control
Switch-over finishing measurement control
Reserved for inputs/outputs
Intermediate dressing upon key
Handwheel key
Program interrupt key
Stroke reversal key
Infeed stop key
Selection of wear compensation, comparison or nominal dimensions
Selection ... with/without grinding spindle monitoring
Global fine compensation
Incremental X fine compensation
Incremental Z fine compensation
Fine compensation seat-specific
1st index ... seat number
2nd index ... axis
Do not approach the return position of the Z-axis in -1-, MCS=0
WCS=1
Type of return position in
X return position; dresser or workpiece can be collision-free
approached using a machine specific return position
Z return position; dresser or workpiece can be approached without
collision using a machine-specific return position.
Measurement control tolerance in which a measurement control
signal is expected
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding