Turning On, Reference Point Approach; Turning On And Reference Point Approach - Siemens SINUMERIK 802D Programming And Operating Manual

Turning on, reference point approach

3.1

Turning On and Reference Point Approach

Note
When turning on the SINUMERIK 802D sl and the machine, please also observe the
machine documentation, since turning on and reference point approach are machine-
dependent functions.
Operating sequence
First, turn on the power supply of CNC and machine.
After the control system has booted, you are in the "Position" operating area, in the
"Reference point approach" mode.
The 'Reference point' window is active.
Figure 3-1
The "Reference point" window displays whether the axes are referenced.
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Reference-point approach start screen
3
33