Table of Contents
Advertisement
How shaping is executed
In the cycle, the shaper allowance is machined first and then all dressing strokes are
executed. The current state is shown in the fields.
The procedure can be stopped at any time.
Press the "Start shaping" softkey to restart the procedure. Values can be modified.
Exit the "Shaping" function.
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Define
4.5 Shaping/dressing
51
- Quick Links:
- Control and Display Elements
Hide quick links:
Advertisement
Table of Contents
