Siemens SINUMERIK 802D Programming And Operating Manual page 243

Programming example
N10 G0 X0 Z0
N20 DIAMOF
N30 G1 X30 S2000 M03 F0.8
N40 DIAMON
N50 G1 X70 Z-20
N60 Z-30
N70 DIAM90
N80 G91 X10 Z-20
N90 G90 X10
N100 M30
Note
A programmable offset with TRANS X... or ATRANS X... is always evaluated as radius
dimensioning. Description of this function: see the next section.
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
;Approach starting point
Diameter input off
; X-axis = traverse axis active
; traverse to radius position X30
; Diameter dimensions active
; Traverse to diameter position X70 and Z-20
; diameter programming for absolute dimension and
; radius programming for incremental dimension
Incremental dimension
Absolute dimensions
;End of program
Programming
10.2 Positional data
243