HBM MP85A Operating Manual page 81

MP85A process controller
MP85ADP PROFIBUS status
Error state
BD_SEAR, WT_PARM, WT_CONF states
DATA_EX status
Control LEDs for the Ethernet status are located underneath the MP85A
process controller.
LED Ethernet status
Physical connection present
Transmit / receive data
100 MBit transmission speed
10 MBit transmission speed
TIP:
The relevant device status and error overview is clearly displayed in the
Status overview window. Open the window via the "Status" button in the
"Measured value display" window.
The meaning of the displays and possible corrective measures for error
messages are listed in the online help (use F1 to call the Help). Further
helpful tips and setting information can be found in the online help in the FAQs
section.
A2392−5.0 en
Red LED Yellow
LED
x
x
Green LED
−
−
on
−
81
Green Flashing
LED LED
x
Yellow LED
on
flashing
−
on or flashing
HBM