HBM MP85A Operating Manual page 38

38
•
Display in measuring mode:
−18.0024
!
Status field
•
Function of the keys:
SET
1. Changing from measuring mode to
input mode
2. Choose the first parameter within
the group.
3. Confirm the entry
4. Return to measuring mode (press
for 2 seconds)
Flashes in the status field if the parameter value can be edited
↑
•
Keys
+
Keep key pressed − Value runs continuously
Short key press − Advance by single value
During measurement, if you press
1. Measured values
• MVx Measured value for channel x
• MVy Measured value for channel y
2. Process status, "ProcStat"
• Alarm The last process was terminated via the alarm window
• O K The last process was OK
• N O K The last process was not OK
• Started A process has been started and not yet finished
3. Status of the digital inputs and outputs
The MP85A(-S) has 5 inputs and 8 outputs.
The MP85ADP(-S) has 1 input and 4 outputs.
• Input
HBM
Measured value
x
kg
Unit
−
+
set
MP85A process controller
−
+
Selecting the
parameter/group
+
−
, the following will be displayed:
−
not set
A2392−5.0 en