MP85A process controller
Fig. 5.1: System configuration with the MP85A process controller
5.1 Operation
5.1.1 Device settings, measured values, process status, PROFIBUS,
memory cards, error types, firmware update, device backup
The MP85A process controller device display shows the measured values
and status information for measurement channels, process status, digital
inputs/outputs and parameter set backup; devices with PROFIBUS interface
also display the PROFIBUS status.
You can switch between individual displays and menus with the device
keyboard.
Use the device menu to set the Ethernet, CAN bus or PROFIBUS addresses.
In addition, a menu is available for device identification (serial number, firm-
ware and hardware version, etc.) and for backing up the 31 Flash parameter
sets.
All other device settings are software set via the PME Assistant or the
INDUSTRYmonitor.
A2392−5.0 en
External
display
terminal
(option)
Sensors
37
HBM