60
7
Switch tester with MP85A(DP)-S EASYswitch
The functions for switch and haptic tests are only available in an
MP85A(DP)-S EASYswitch (switch test version).
7.1 Switch test
All the switching characteristics are recorded by the MP85A(DP)-S EASY-
switch and evaluated according to specific features, such as actuating force,
release force, differential force and differential travel.
In addition to these mechanical parameters, the electrical switching point can
also be recorded. To do this, a switch testing type window is placed on the
marked points.
Fig. 7.1: Switch test
Up to 5 switches or switching elements can be checked and evaluated in one
procedure.
It is checked whether the switching of the switch lies within the corresponding
switch test window and whether the specified switching function (make/break)
is met.
The electrical check is implemented via the MP85A(DP)-S EASYswitch digital
inputs. Evaluation takes place at the end of the process.
HBM
MP85A process controller
A2392−5.0 en