Process Data Storage/Production Data Management - HBM MP85A Operating Manual

MP85A process controller
(cyclical data also exchanged via PROFIBUS)
1 x MP85A process controller, 500 measurement points, save curves
and results to MMC/SD card
3 x MP85A process controller, 600 measurement points, save curves
and results to MMC/SD card
1 x MP85A process controller, 500 measurement points, output curves
and results via Ethernet, Ethernet connected directly
3
x MP85A process controller, 500 measurement points, output curves
and results via Ethernet, Ethernet connected via switch
3
x MP85A process controller, 600 measurement points, output curves
and results via Ethernet, Ethernet connected via switch
3
x MP85A process controller, 600 measurement points, output curves
only via Ethernet, Ethernet connected via switch

8.8 Process data storage/production data management

It is possible to store all the process data for quality control purposes. You can
save process curves and/or process results and statistical data (separate
files). The data can be stored internally on the memory card or externally via
the bus interface to a PC. The setting to determine which data is being stored
can be made in the PME Assistant in the "Data protection" area or with the
INDUSTRYmonitor program.
If the data is being stored on the memory card, there are 2 setting variants (in
both cases, data transfer from the memory to the PC followed by visualization
are possible):
1. Ring buffer for the last 1,000 or 10,000 processes
2. Unlimited storage up to the capacity limit of the memory card
Example: With a 2 GByte storage capacity MMC/SD card and standard
process curves approx. 3 kBytes in size, up to 600,000 processes can be
stored.
A2392−5.0 en
Configuration
73
Time require-
ment in s
(approx.)
2
2
4 − 5
4 − 5
4 − 6
2 − 3
HBM