Configuring S,G Expiry Timers - Dell S4048T Configuration Manual

On system
Table of Contents

Advertisement

Examples of Viewing PIM-SM Information
To display which interfaces are enabled with PIM-SM, use the show ip pim interface command from
EXEC Privilege mode.
Dell#show ip pim interface
Address
Interface Ver/
165.87.34.5
Te 1/10
10.1.1.2
Vl 10
20.1.1.5
Vl 20
165.87.31.200
Vl 30
NOTE:
You can influence the selection of the Rendezvous Point by enabling PIM-Sparse mode on a
Loopback interface and assigning a low IP address.
To display PIM neighbors for each interface, use the show ip pim neighbor command EXEC Privilege
mode.
Dell#show ip pim neighbor
Neighbor
Interface Uptime/Expires
Address
127.87.5.5
Te 1/11
127.87.3.5
Te 1/12
127.87.50.5
Te 2/13
Dell#
To display the PIM routing table, use the show ip pim tib command from EXEC privilege mode.
Dell#show ip pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 192.1.2.1), uptime 00:29:36, expires 00:03:26, RP 10.87.2.6, flags: SCJ
Incoming interface: TenGigabitEthernet 1/12, RPF neighbor 10.87.3.5
Outgoing interface list:
TenGigabitEthernet 1/11
TenGigabitEthernet 2/13
(10.87.31.5, 192.1.2.1), uptime 00:01:24, expires 00:02:26, flags: FT
Incoming interface: TenGigabitEthernet 2/11, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 1/11
TenGigabitEthernet 1/12
TenGigabitEthernet 2/13
--More--

Configuring S,G Expiry Timers

By default, S, G entries expire in 210 seconds. You can configure a global expiry time (for all [S,G] entries) or
configure an expiry time for a particular entry.
If you configure both, the ACL supersedes the global configuration for the specified entries.
Nbr
Mode
Count
v2/S
0
v2/S
1
v2/S
1
v2/S
1
01:44:59/00:01:16
01:45:00/00:01:16
00:03:08/00:01:37
Query
DR
Intvl
Prio
30
1
30
1
30
1
30
1
Ver
DR
Prio/Mode
v2
1 / S
v2
1 / DR
v2
1 / S
PIM Sparse-Mode (PIM-SM)
DR
165.87.34.5
10.1.1.2
20.1.1.5
165.87.31.201
782

Advertisement

Table of Contents
loading

Table of Contents