Dell S4048T Configuration Manual page 616

Type
IEEE 802.1 Organizationally
Specific TLVs
127
127
127
IEEE 802.3 Organizationally
Specific TLVs
127
127
127
127
TLV
Port-VLAN ID
Port and Protocol VLAN ID
Protocol Identity
MAC/PHY Configuration/Status
Power via MDI
Link Aggregation
Maximum Frame Size
Description
On Dell Networking systems,
indicates the untagged VLAN to
which a port belongs.
On Dell Networking systems,
indicates the tagged VLAN to
which a port belongs (and the
untagged VLAN to which a port
belongs if the port is in Hybrid
mode).
Indicates the protocols that the
port can process. Dell Networking
OS does not currently support this
TLV.
Indicates the capability and current
setting of the duplex status and bit
rate, and whether the current
settings are the result of auto-
negotiation. This TLV is not
available in the Dell Networking
OS implementation of LLDP, but is
available and mandatory (non-
configurable) in the LLDP-MED
implementation.
Dell Networking supports the
LLDP-MED protocol, which
recommends that Power via MDI
TLV be not implemented, and
therefore Dell Networking
implements Extended Power via
MDI TLV only.
Indicates whether the link is
capable of being aggregated,
whether it is currently in a LAG,
and the port identification of the
LAG. Dell Networking OS does not
currently support this TLV.
Indicates the maximum frame size
capability of the MAC and PHY.
Link Layer Discovery Protocol (LLDP) 616