Sample Configuration To Mark Non-Ecn Packets As "Yellow" With Single Traffic Class - Dell S4048T Configuration Manual

seq 5 permit any ecn 0
class-map match-any ecn_0_cmap
match ip access-group ecn_0 set-color
!
policy-map-input ecn_0_pmap
service-queue 0 class-map ecn_0_cmap
Applying this policy-map "ecn_0_pmap" will mark all the packets with 'ecn == 0' as yellow packets on
queue0 (default queue).
Sample configuration to mark non-ecn
packets as "yellow" with single traffic
class
Consider the use case where the packet with DSCP value "40" need to be enqueued in queue#2 and packets
with DSCP value as 50 need to be enqueued in queue#3. And all the packets with ecn value as '0' must be
marked as 'yellow'.
The above requirement can be achieved using either of the two approaches.
The above requirement can be achieved using either of the two approaches.
Approach without explicit ECN match qualifiers for ECN packets:
!
ip access-list standard dscp_50
seq 5 permit any dscp 50
!
ip access-list standard dscp_40
seq 5 permit any dscp 40
!
ip access-list standard dscp_50_non_ecn
seq 5 permit any dscp 50 ecn 0
!
ip access-list standard dscp_40_non_ecn
seq 5 permit any dscp 40 ecn 0
!
class-map match-any class_dscp_40
match ip access-group dscp_40_non_ecn set-color yellow
match ip access-group dscp_40
!
class-map match-any class_dscp_50
match ip access-group dscp_50_non_ecn set-color yellow
match ip access-group dscp_50
!
policy-map-input pmap_dscp_40_50
service-queue 2 class-map class_dscp_40
service-queue 3 class-map class_dscp_50
Approach with explicit ECN match qualifiers for ECN packets:
!
ip access-list standard dscp_50_ecn
seq 5 permit any dscp 50 ecn 1
yellow
Quality of Service (QoS) 869