Dell S4048T Configuration Manual page 992

MIB Object
copySrcFileName
copyDestFileType
copyDestFileLocation
copyDestFileName
copyServerAddress
OID
.
1.3.6.1.4.1.6027.3.5.1.1.1.1.
4
.
1.3.6.1.4.1.6027.3.5.1.1.1.1.
5
.
1.3.6.1.4.1.6027.3.5.1.1.1.1.
6
.
1.3.6.1.4.1.6027.3.5.1.1.1.1.
7
.
1.3.6.1.4.1.6027.3.5.1.1.1.1.
8
Object Values
3 = tftp
4 = ftp
5 = scp
6 = usbflash
Path (if the file is not in
the current directory) and
filename.
1 = Dell Networking OS
file
2 = running-config
3 = startup-config
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Path (if the file is not in
the default directory) and
filename.
IP Address of the server.
Simple Network Management Protocol (SNMP)
Description
is FTP or SCP, you
must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
Specifies name of the file.
• If
copySourceFileType
is set to running-
config or startup-
config,
copySrcFileName is
not required.
Specifies the type of file
to copy to.
• If
copySourceFileType
is running-config or
startup-config, the
default
copyDestFileLocatio
n is flash.
• If copyDestFileType
is a binary, you must
specify
copyDestFileLocatio
n and
copyDestFileName.
Specifies the location of
destination file.
• If
copyDestFileLocatio
n is FTP or SCP, you
must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
Specifies the name of
destination file.
The IP address of the
server.
• If you specify
copyServerAddress,
you must also
specify
992