Dell S4048T Configuration Manual page 1225

10.1.1.3
Authentication: (none)
Figure 159. VRRP for an IPv6 Configuration
NOTE: In a VRRP or VRRPv3 group, if two routers come up with the same priority and another router
already has MASTER status, the router with master status continues to be MASTER even if one of two
routers has a higher IP or IPv6 address.
The following example shows configuring VRRP for IPv6 Router 2 and Router 3.
Configure a virtual link local (fe80) address for each VRRPv3 group created for an interface. The VRRPv3
group becomes active as soon as you configure the link local address. Afterward, you can configure the
group's virtual IPv6 address.
Virtual Router Redundancy Protocol (VRRP) 1225