Detaching And Refitting The Main Charger Unit - Kyocera TASKalfa 420i Service Manual

2KR/2KS

(2) Detaching and refitting the main charger unit

Follow the procedure below to replace the main charger unit.
Procedure
1. Remove the developing unit (see page 1-5-
28).
2. Release the inserted part and remove the
connector cover.
3. Remove the connector.
4. Remove the screw.
5. While pushing the hole with a sharp-pointed
object, remove the main charger unit.
6. Release the inserted part and remove the
cleaning motor unit from the main charger
unit.
7. Replace the main charger unit.
8. Refit the cleaning motor unit to the main
charger unit.
9. Install the main charger unit.
1-5-26
Connector
Connector cover
Figure 1-5-52
Screw
Main charger unit
Figure 1-5-53
Inserted part
Figure 1-5-54
Inserted part
Hole
Main charger unit
Cleaning motor unit