Detaching And Refitting The Main Charger Unit - Kyocera ECOSYS M2030dn/PN Service Manual

(2) Detaching and refitting the main charger unit

Procedure
1. Remove the developer unit (See page
1-5-27).
2. Remove the drum unit (See page 1-5-
28).
3. Remove the tape.
4. While pushing on the main plate 1, slide
the main charger unit 2.
5. Remove the main charger unit by lifting
it.
6. Check or replace the main charger unit
and refit all the removed parts.
Tape
Drum unit
Main charger unit
1
2
Figure 1-5-42
Figure 1-5-43
1-5-29
2PK/2PL/2PM/2PN
Main charger unit
Main plate
Main charger unit