Kyocera TASKalfa 420i Service Manual page 161

Section Description
System 00
Initial JAM
04
Cover open
05
Secondary paper feed
does not start
09
Sequence error jam
Paper 10
feed No paper feed from
section cassette 1
11
No paper feed from
cassette 2
12
No paper feed from
cassette 3
13
No paper feed from
cassette 4
14
No paper feed from MP
tray
15
Jam in paper feeder
horizontal paper con-
veying section 1
16
Jam in paper feeder
horizontal paper con-
veying section 2
17
Jam in paper feeder
horizontal paper con-
veying section 3
Conditions
The power is turned on when a sensor in the conveying
system is on.
Cover is open during copying.
Secondary paper feed does not start within specified time
of arrival of paper at the registration section.
A communication sequence error occurs between the
machine and the 3000-sheet paper feeder.
Feed switch 1 (FSW1) does not turn on within the specified
time of paper feed clutch 1 (PFCL1) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within the specified time.
Feed switch 2 (FSW2) does not turn on within the specified
time of paper feed clutch 2 (PFCL2) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within the specified time.
Feed switch 3 (FSW3) does not turn on within the specified
time of PF paper feed clutch 1 (PFPFCL1) turning on; the
clutch is then successively turned off for 1 s and turned
back on, but the switch again fails to turn on within the
specified time (paper feed from paper feeder).
Feed switch 3 (FSW3) does not turn on within the specified
time of PF paper feed clutch 1 (PFPFCL1) turning on
(paper feed from 3000-sheet paper feeder).
The PF feed switch (PFFSW) does not turn on within the
specified time of PF paper feed clutch 2 (PFPFCL2) turning
on; the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time (paper feed from paper feeder).
The MP feed switch (MPFSW) does not turn on within the
specified time of the MP paper feed clutch (MPPFCL) turn-
ing on; the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
Paper path sensor 3 (PPS3) does not turn on within speci-
fied time of PF paper feed clutch 2 (PFPFCL2) turning on
(paper feed from 3000-sheet paper feeder).
Paper path sensor 2 (PPS2) does not turn on within speci-
fied time of the paper path sensor 3 (PPS3) turning on
(paper feed from 3000-sheet paper feeder).
Paper path sensor 1 (PPS1) does not turn on within speci-
fied time of the paper path sensor 2 (PPS2) turning on
(paper feed from 3000-sheet paper feeder).
2KR/2KS-1
Specified time
-
-
40 s
-
1152 ms
1209 ms
1209 ms
780 ms
1209 ms
3913 ms
360 ms
380 ms
250 ms
1-4-3