Detaching And Refitting The Main Charger Unit - Kyocera KM-2550 Service Manual

2FT

(3) Detaching and refitting the main charger unit

Follow the procedure below to replace the main charger unit.
Procedure
1. Open the front cover and remove the waste
toner box and inner cover.
2. While lifting the main charger unit toward the
upper right, remove the unit from the MFP.
3. While pressing the main charger release
lever in the direction indicated by the arrow
at the removal stopper position to release
the removal stopper, remove the main
charger unit from the MFP.
4. Replace the main charger unit and refit all
the removed parts.
1-6-40
Main charger
release lever
Main charger unit
Figure 1-6-72