Detaching And Refitting The Main Charger Unit - Kyocera FS-1370DN Service Manual

(2) Detaching and refitting the main charger unit

Procedure
1. Remove the drum unit (See page 1-5-12).
2. Remove the tape.
3. While pushing on the main plate (1), slide
the main charger unit (2).
4. Remove the main charger unit by lifting it.
5. Check or replace the main charger unit and
refit all the removed parts.
Tape
Drum unit
Main charger unit
Main plate
Figure 1-5-17
Figure 1-5-18
2L0
Main charger unit
Main charger unit
1-5-13