Remove The Tapes And Pad; Install The Optional Paper Feeder - Kyocera TASKalfa 420i Service Manual

Remove the tapes and pad.

1. Remove two tapes.
2. Remove the pad.

Install the optional paper feeder.

1. Install the optional paper feeder as necessary.
2. Verify levelness at the four corners of the platen using a level gauge, and
adjust the level bolts at the bottom of the machine to optimize levelness.
Release the lever holding mirror 1 and 2 frames.
1. Turn the lever of the machine rear side with
the tool to release the lever holding the mir-
ror 1 and 2 frames.
Pad
Tape
Figure 1-2-4
Lever
Figure 1-2-5
2KR/2KS
DP
A2
B1
1
O PT
Tape
1-2-5